Reclassifying Mufflers

Reclassifying Mufflers


Reclassifying Mufflers are an upgrade from Sintered Bronze Mufflers. They offer the best noise reduction – up to 35 dB. Available from 1/8 NPT through 1 NPT, Reclassifying Mufflers eliminate oil mist. Exhaust air from cylinders and valves often contain oil mists that cancontaminate the workers’ breathing air, aff ecting their health. Per OSHA Standard 29 CFR 1910.1000, a worker’s cumulative exposure to oil mist must not exceed 5mg/mby volume in any eight hour shift of a 40 hour work week.

The patented wrap design of the removable element separates oil from the exhausted air so virtually no oil is released into the environment. Based on an intake of 50 PPM at 100 PSIG, the Reclassifying Mufflers reclassify and reduce the exhausted oil mist to 0.015 PPM. A reservoir where oil accumulates at the bottom can be drained by attaching a 1/4″ tube.

Each Reclassifying Muffler passes a certain volume of air with minimal back pressure restriction so it doesn’t interfere with the operation of the cylinder or valve. When used with cylinders, the “Muffler Quick Pick” table helps you select the appropriate model based on the actual bore and stroke of the cylinder.


Do NOT follow this link or you will be banned from the site!